Electric Car jack for sallon cars and jeep

Description: Effortlessly change a tyre and quickly get back on the road Raises a car at the touch of a button Two -tons lift capability, suitable for cars and light vans Supplied with a carry case, hand gloves, wheel chock, battery clamp, extension cable, & screw driver. Durable metal finish Can use the manual hand crank to lower or raise the car if there is no power when the car is jacked. The saddle is made of high strength material, tough and anti-slip that protects the car from damaging Fused for overload protection Automatically limits the highest or the lowest height Specially suitable for women, fat and tall people How to use : 1) Plug the jack to the 12 volt socket provided in the car 2) Place the jack under the car, where the car jack is to be mounted (please check the car manual for the exact place for placing the car jack) 3) Switch on the car 4) Start the UP button for increasing the height 5) After the sufficient height is achieved, remove the tyre 6) Replace the tyre with the new one 7) Use the LOWER ARROW button to reduce the car height 8) Let the jack get unscrewed, till it stops rotating and stops automatically 9) Unplug jack from 12 volts car plug from the car Precautions on use: 1. Start the engine before operating the impact wrench 2. Do not use the impact wrench continuously for more than 10 minutes 3. Ensure that the correct socket is attached to the wrench head when loosening the wheel nuts 4. Do not over tighten the wheel nuts 5. Always keep the children away from the working area